Useful info, thanks for that.
PaulH.
----- Original Message -----
... So I decided to remove the cover plate to
see what other options I might have. The end of the bolt was not exposed
enough to try it from the other side but I could see the extent of the
problem because the spacer was holding it all in. I used a chisel as a
wedge to introduce a small gap between spacer and windshield frame and
then using a small hacksaw in the gap, hacksawed the excess bolt piece
off.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|