Any curved fan blade goes with the convex side forward.
Early MGB metal blade has notches in the forward edges to clear the
rearward extending bottom tank of the radiator. See here:
http://mgaguru.com/mgtech/cooling/pics/b_fan.jpg
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
At 11:52 AM 9/10/2010 -0400, Bill Mills wrote:
>.... I could not decide which way around the 6 blade metal fan
>should be attached. The metal fan blades are cut such that there is
>a "cut away" side to each blade. Should this "cut away" side be to
>the front (radiator side) or to the back (block side)?
>....
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
