Some at least aren't symmetrical - the OD switch points backwards, is
pretty-well right at the top and above a jutting-out piece of the casting.
The reverse-light switch points sideways, lower down, and much easier to get
grips on.
http://www.mgb-stuff.org.uk/images/gbs2.jpg (rubber bumper pre-77).
I've not had to change either, but even getting to the spades on the OD
switch needed the rear crossmember dropping on a jack, the centre cubby
removing, tunnel carpet pulled back, and the little (4-synch) removable
panel ... removed.
PaulH.
----- Original Message -----
>I don't know about that -- they are physically exactly the same switch, in
> symmetrical locations (one on the left side, one on the right), at least
> on
> a late LH OD gearbox.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
