My car has been down for better than a month now, stalling issue suddenly
became a won't turn over issue.
Last night I finally got into it. Pulling the wires off the starter and making
sure they were good. The connector on the white/green was suspect so I
replaced it.
On re-assembly, I found that I couldn't get the nut on the battery post of the
solenoid. It was stripped out.
Assuming that the starter is still good, I guess I need to replace the
solenoid. I'm assuming that they can be separated and a new one put on?
I guess I need to bench test the starter before I do that too.
Any words of wisdom on this path?
Paul.
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|