Thought I would update everyone on the brake master cylinder situation.
After 2 weekends of extremely cold weather finally got back into the garage.
The PROBLEM was that the brand new brake master cylinder had a warped
resevior. Took off the brand new resevior and put on the old one. Luckily
I had a brake master cylinder rebuild kit here that had new seals for the
resevior.
Craig
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|