A cause of that is spiked and holed points, where the spike catches in the
hole and keeps the solenoid energised even after it has operated and
supposed to have opened the points. It's one of those warnings, like when
you have to clout it to get it to start. Eventually, it will stop working
altogether.
PaulH.
----- Original Message -----
> ... the
> pump would work properly for a time, then not work until power was
> switched off and on, at which time it would work properly again for a
> while.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|