I doubt they will be marked with a part number. You *will* have to take
them out, then look at the style as well as the part number of the
distributor which *is* on the outside. There are four different types of
points just for the Lucas 25D4 and 45D4 distributors which I think can be
fitted to an MGA, and you may have an after-market one. The two for the
25D4 *may* be interchangeable but I haven't tried. The two for the 45D
definitely aren't, nor with the 25D4 types. You might like to have a look
at http://www.mgb-stuff.org.uk/wn_ignitionframe.htm and click on 'Points
Types' which was written with the MGB in mind.
PaulH.
----- Original Message -----
> don't assume that you have the correct distributor. take the existing
> points out and inspect them for part numbers.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|