Sorry. Yup.
If you don't have a large Posidrive screwdriver, I've found that there's
an impact screwdriver (Great Neck, I believe) available at the most
parts stores that has a large bit which strangely seems to have the
correct (or at least usable) profile. If you use a large Phillips ...
well, let's just say it didn't go well for me.
Glenn
> I have just got the door buffer rubber things for my MGB GT. The
> door was beginning to open too wide thus jeopardising the wing. But
> how does one put them in the hinges. The hinges do not give one much
> room to manoeuvre. They seem to have a hole in the centre for a screw
> .........do I have to take the doors off ??
>
> Regards
>
> Barrie Robinson
--
Be careful when you deal with old hippies. They can be real touchy.
- Ferris Bueller
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|