The machine shop needs to grind the stems of the valves. They cut the
seats too deep.
Sent from my iPhone
On Oct 3, 2009, at 7:22, "Tom Gunderson" <thgun@comporium.net> wrote:
> I have had my 1500 head machined. New seats and guides ,.003
> surfaced. I put
> the rocker arm on and I have 2 of the rockers that will not adjust
> when the
> head is mounted on the block. The adjustment screws are all the way
> up and the
> 2 rockers are tight. The lifters and rods look like they are in the
> correct
> alinement. What can I do?
> Tom Gunderson,
> 1500 mga rst
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|