On Sep 15, 2009, at 1:12 AM, Paul Hunt wrote:
> This can be caused by wear on the pin, or the cable not letting the
> latch come fully back. For the pin try turning it just 1/4 turn
> which brings a new 'face' into play.
I ended up taking a couple pieces of advice. One was this, the other
was to set the spring tension. I ramped it way up, to the point where
the latch would refuse to close. I then released the spring, one full
turn at a time. As soon as it closed, I stopped. Knock on wood,
haven't had trouble since.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|