Problem resolved, I believe. Thanks to Joe Curto who sent down new
floats, float pins, needles and seats, my 67 MGB-GT is running without
the gasoline pouring out of the overflow tubes and the stumble that
followed. I got rid of the Grose jets that I had in there and went
with the viton tipped needles. I know I should have replaced one bit
at a time to see just what exactly was causing the problem but
frustration and the reliability factor made me just throw everything
in at once.
Dave Houser
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|