That's exactly what I did - drilled them out and then riveted in new
rubber pieces. The usual precautions - just drill enough to remove the
rivet and use the minimum length rivet needed for the job so it doesn't
contact the glass in anyway (not sure if this is a problem, wasn't for
me).
David Councill
64 MGB
67 MGBGT
72 MGB
-----Original Message-----
From: mgs-bounces@autox.team.net [mailto:mgs-bounces@autox.team.net] On
Behalf Of Aaron Whiteman
Sent: Sunday, September 06, 2009 11:48 AM
To: MG Mailing List
Subject: [Mgs] those dohickies that hold the visors in place
Can I just drill out the rivets that hold the little rubber thing that
holds the visor in place against the windshield? I need to replace
mine, but will just live with black tape if it involves taking the
screen apart.
--
Aaron Whiteman
'75 B, in less pieces every day.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|