Re: [Mgs] On to the Next Challenge

mgs

Re: [Mgs] On to the Next Challenge - Starter

To:	"Max Heim" <max_heim@sbcglobal.net>, "MG List" <mgs@autox.team.net>
Subject:	Re: [Mgs] On to the Next Challenge - Starter
From:	"Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date:	Tue, 23 Jun 2009 09:02:02 +0100

No and Yes!  No it doesn't need to be bolted down to be grounded, it has a
ground wire to one of the winding terminals. But it does need to be bolted
down for mechanical reasons i.e. to avoid unwanted flexing of the wires and
eventual fracture.

PaulH.
  ----- Original Message -----


  Does the relay need to be grounded (that is, properly bolted down)?
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Mgs] On to the Next Challenge - Starter, Dan DiBiase Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt Re: [Mgs] On to the Next Challenge - Starter, Tuck Southworth Re: [Mgs] On to the Next Challenge - Starter, Max Heim Re: [Mgs] On to the Next Challenge - Starter, Dan DiBiase Re: [Mgs] On to the Next Challenge - Starter, Max Heim Re: [Mgs] On to the Next Challenge - Starter, Dan DiBiase Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt <= Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt Re: [Mgs] On to the Next Challenge - Starter, Dan DiBiase Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt

Previous by Date:	Re: [Mgs] list, Paul Hunt
Next by Date:	Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt
Previous by Thread:	Re: [Mgs] On to the Next Challenge - Starter, Dan DiBiase
Next by Thread:	Re: [Mgs] On to the Next Challenge - Starter, Paul Hunt
Indexes:	[Date] [Thread] [Top] [All Lists]