Try lots of PB and then use a drill with a left hand twist. The
combination of torque, friction heat and vibration usually backs most
screws out.
Ed Woods wrote:
> List,
>
> I am still struggling with what started out to be a "simple" windscreen
> glass replacement that has turned into a struggle to remove the screws
> which retain the four corner brackets. Very few came out in the standard
> "left loose" manner. The remainder had to have their heads drilled out.
>
> Any ideas about how to remove the remains of these screws? How much heat
> will they take before the aluminum of the frame is damaged?
>
> Thanks,
>
> Ed Woods _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as degraff@erols.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|