Can you get a couple of small screwdrivers in between the threads and the base
of the tube to try and gently lever it from side-to-side? How far have you
got in dismantling? If it is still runable you could try running it, even
with no coolant, to heat up the head a bit. Failing that unless the head
needs skimming I'd put it or tie it up out of the way with the tube still
attached. There should be several coils of tubing to give you plenty of
scope.
PaulH.
----- Original Message -----
Thought I might as well get to work pulling the head. I managed to get
everything loose except the temp sender. The nut unthreaded all right, but
the probe is absolutely stuck. Any suggestions?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|