For what is it worth I have had many cases where there is a blockage right
at the bleeder screw at a caliper/wheel cylinder. Before you go 7 kinds of
crazy, you might want to unscrew the bleeder off of the caliper and use a
needle or ice pick make sure the hole is free and clear into the wheel
cylinder.
Also did you bench bleed the master before installing it? If you did not
this could be a large part of the problem.
>
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|