Do you mean for the gauge or the anti runon system? AFAIK in the former case
North American MGBs changed back from an electric oil gauge to a mechanical
(but still rectangular) in 72. The anti-runon switch (fitted from 73) should
be in the same area i.e. on a Tee near the right rear corner of the block
where the oil pressure gauge pipe/sender is attached, with a grey/yellow
wire.
PaulH.
----- Original Message -----
...I am looking for the location of the oil
pressure switch for replacement (in a '74B).
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|