That switch controls the "key in" buzzer, just like on real cars.
Most of the time it is disconnected, because we don't need no stinkin
buzzers in our MGs.
It may also be used in the seat belt interlock system on some years, but
that's another inconvenience we can do without too.
Kelvin.
> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com@autox.team.net
> [mailto:mgs-bounces+doddk=mossmotors.com@autox.team.net] On
> Behalf Of dannyvarnado
> Sent: Thursday, July 31, 2008 7:08 PM
> To: mgs@autox.team.net
> Subject: [Mgs] Ignition switch wiring
>
> Hi List,
> Can anyone tell me what the purple/pink stripe wire in the
> ignition switch harness attaches to on the steering column end?
> This is the wire that goes to ground when the key is
> inserted. It has a smaller than normal insulated female
> spade connector and does not connect to the ignition switch itself.
> Danny V.
> '76 MGB
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|