When bleeding the brakes on a 70, is it also necessary to bleed the clutch's
slave cylinder at the same time? The clutch has about 13K miles on it and it.
I did bleed the brakes correctly and centered the pressure switch and they
seem to work real good, the brake check light switch had come on. I didn't
recognize any signficant difference in the clutch pedal other than it seems to
be disengaging pretty close to the floor now, a little low I believe for a
clutch kinda still somewhat new? Thanks
Dave Willner
Stroudsburg, PA
59 TR3A Apple Green
70 MGB BRG
70 BSA 441 Victor Special
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|