mgs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Mgs] 90 degree angle drive

from [Bernd] [Permanent Link][Original]
To: MG list <mgs@autox.team.net>
Subject: [Mgs] 90 degree angle drive
From: Bernd <1971mgb@cox.net>
Date: Wed, 23 Apr 2008 21:02:04 -0400 
does anyone know what the purpose is for the screw that is located on top of 
the angle drive. That would be the angle drive that fit's onto the transmission 
of the "B", could be for greasing the gears in the drive?.  
71 MGB
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Mgs] 90 degree angle drive, Bernd <=
Previous by Date:  Re: [Mgs] just one last thing to remove before the car goes to, Dodd, Kelvin
Next by Date:  [Mgs] MGB pedal box bolt, Ed Woods
Previous by Thread:  Re: [Mgs] just one last thing to remove before the car goes to, Dodd, Kelvin
Next by Thread:  [Mgs] MGB pedal box bolt, Ed Woods
Indexes:  [Date] [Thread] [Top] [All Lists]