The manual is correct. The rear two bolts are a bit difficult to reach,
but
there are only four. Careful when you lift the seat out as the tracks may
just fall off, as well as the spacers, and the aluminum washers in the
spacers
that the bolts go through.
Regards,
Robert B. Houston
================================
Is there any reason the spacers need to be made out of wood? Could an
appropriately sized AL bar stock work just as well?
It seems foolish to keep on replacing rotted wood spacers.
Larry Daniels
79 MGB LE
60 Bugeye
67 Austin A60 Pickup (Ute)
"You only need two tools: WD-40 and Duct Tape. If it
doesn't move and should, use the WD-40. If it
shouldn't move and does, use the duct tape."
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|