At 06:51 PM 2/16/2008 -0600, Robert J. Guinness wrote:
>.... MGA's H4 carbs .... The banjo fitting to the float bowl covers
>.... One face is indented so that the gasket fits within the
>indent. The other is flush. .... Which "face" mates with the banjo
>bolt head and which one mates with the float bowl cover? ....
The counterbore side goes under the bolt head where a shoulder on the
bolt compresses the gasket into the counterbore. The falt side goes
against the float cover where you should be able to see the edge of
the gasket when it it assembled. If you get it the wrong way the
raised edge on the banjo may contact the float cover preventing the
gasket from sealing.
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|