This afternoon I found that my 79B was leaking oil from the bottom cover of
my steering damper.
I removed the lower cover plate and started draining the oil so I could
clean everything up before using silicone to make a new gasket. I moved the
steering wheel back and forth to facilitate draining the fluid quicker which
caused the end of the steering pinion to protrude a few inches beyond where
the end cover is supposed to keep it. I'm sure the threads at the end of
the pinion disengaged from the rack at some time while I was moving the
steering wheel back and forth. Can I just tap it back into place, or do I
have to allign something first?
Thanks,
Monte
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|