mgs
[Top] [All Lists]

[Mgs] [Fwd: Re: ZDDP, Site feedback from Valvoline.com]

To: MGs <mgs@autox.team.net>
Subject: [Mgs] [Fwd: Re: ZDDP, Site feedback from Valvoline.com]
From: David Woerpel <dwoerpel@wi.net>
Date: Mon, 03 Sep 2007 11:53:45 -0500
Received this from Valvoline after I read some of your replies.
Dave
59 MGA 1500
59 :{)
05 MCS
Burlington WI

 >Valvoline wrote:

The oil industry per ILSAC had to only decrease the levels of ZDDP (Zinc)
in certain viscosity to meet new emission standards. The ILSAC rated oils
still have an average of .085 levels of zinc. Testing has shown on standard
OEM set ups that used mild camshafts will still get plenty of protection
from the new rated oils. There is an exception when it comes to extreme
aftermarket applications. If you have a high performance solid lifter set
up with an aggressive cam then you will need to use a quality Racing Oil or
Fleet Oil for break in and normal usage. These oils have an increased level
of Zinc that will range from .14 to .16 and will provide plenty of
protection.
_______________________________________________

Edit your replies

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

<Prev in Thread] Current Thread [Next in Thread>