Gentlemen,
I'm trying to set the mixture of my SU carburettors correctly. The documentation
I have describes, in my words, the following behaviour:
- Press the lifing pin
- The following behaviour could be observed
- RPM drops / engine stalls. (Too weak)
- RPM increases and stays increased. (Too rich)
- RPM increases shortly and then drops just above the level it had prior to
pressing the lifting pin. (Mixture correct)
Now my question: Do I have to press the lifting pin shortly then release it and
wait for the described behaviour? or is the described behaviour noticable for
the duration that I lift the lifting pin?
Thanks in advance,
Menno
'63 MGB
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|