mgs
[Top] [All Lists]

Re: measurements for trunk lid

To: Brian Lundgren <elco506@austin.rr.com>, <mgs@autox.team.net>
Subject: Re: measurements for trunk lid
From: Desmond Mullen <dkmullen@email.unc.edu>
Date: Mon, 13 Nov 2006 15:56:44 -0500
Hey Brian,

I measured it out with your numbers and it looked good so I drilled and cut
the support and it's now a perfect fit.

Thanks a lot!

   :?)

-Desmond
'78 MGB



On 11/13/06 2:57 PM, "Brian Lundgren" <elco506@austin.rr.com> wrote:
> I thought that was the case, but measured just to be sure. Outer = of arm
> measures 8-3/4 and total length from bottom to top extended is 17-1/2  on
> my 75 B.
> 
> 
> 
> Brian Lundgren

-- 
----------------------------------------------------------
Desmond Mullen  dkm@unc.edu  P:919/843-7998 F:919/962-1238
  ====== Morehead Planetarium and Science Center =======
     ====== http://www.moreheadplanetarium.org ======
----------------------------------------------------------




<Prev in Thread] Current Thread [Next in Thread>