Randy,
Infinite patience and a bit of luck are called for to get that circlip
into place. The only tip I can offer is to wirebrush the groove
spotlessly clean before trying to fit the clip. There is a tool for the
job that makes the job much easier. Moss carried it at one time, though I
can't find it in catalogue as I search for it right now.
Bob
On Mon, 29 Aug 2005 18:07:07 -0400 "Randy Widman"
<riwidman@buckeye-express.com> writes:
> Hi Listers,
>
> I'm stymied. I can't seem to be able to get the Circlip on that
> holds the rear
> brake cylinder on. I thought I had it by fashioning a tool to push
> (actually
> hit) the circlip onto the brake cylinder and the circlip broke. It
> sure seems
> like an awful lot of interference fit to be able to get it to spread
> to be
> able to get it on. I'm looking for tips that others have used before
> me.
>
> TIA
>
> Randy Widman
> '79 Red B
|