Contact cement works fine and will hold securely until the end of time,
but it's needlessly difficult to work with as there is no slip-adjustment
possible. I've had good results with vinyl floor & carpet adhesive,
which does have some slip for two or three minutes, and is water soluble
until cured. Much easier to work with.
Bob
On Thu, 25 Aug 2005 10:28:22 -0500 "James Kleemeyer" <jkk@adams.net>
writes:
snip...
. I used Weldwood Original Contact Adhesive, worked
> great, be sure you have the material where you want it, though.
|