Actually on the weber it is at the base of the carb. right in the
middle,on the side closest to the valve cover, look there and you will
see a small brass fitting sticking out, it may be plugged but that is
where you want to hook the hose for the distributer.
-Chad Cooper
>
>
>
>
> Mike Torrusio wrote:
>
>> Well, I looked under the hood. Maybe, having a mechanic is not the
>> way to go. I used to build my own rods a million years ago, now I'm
>> trying to remember everything from those ancient times.
>> Anyway, the vacuum thing (advance?) on the distributer has a nipple
>> but does not have anything attached to it. If I remember correctly,
>> there should be a little rubber hose attached. (Don't make fun of
>> me, I'm very good at legal research). I looked around for it but
>> can't remember where it comes from, so it was a futile gesture.
>> Any help would be appreciated.
>>
>>
>> Cordially,
>>
>> Michael Torrusio, Jr.
>> Paralegal
>> Manager
>> Research Associates, LLC
>> P. O. Box 18194
>> Portland, ME 04112
>>
>> 207.252.5787
|