Mike,
Sorry but the soonest I could get the car jacked up and my wife to
push the clutch pedal was this morning. Near as I can measure it the
travel at the clutch arm is a bit over 1/2". I did notice that the
piston is not retracted all the way inside the slave cylinder when Peg
takes her foot off the pedal.
Cheers,
CR
Mike Duvall wrote:
> Thanks, that would help. It does appear that on the master cylinder the
> arm is pushing all the way into the cylinder.
>
>
> On Apr 16, 2005, at 7:08 AM, Charles & Peggy Robinson wrote:
>
>> Hi Mike,
>>
>> Take a look at the pivot points behind the master cylinder.
>> Elongated holes can affect overall travel.
>>
>> How much travel of the clutch arm did it take to disengage the
>> clutch? If the slave piston travel is up to snuff then there's
>> something wrong within the housing.
>>
>> I'll measure the travel on my '69 B and get back to you.
>>
>> CR
|