No, he >really< means putting a length of rope down the spark plug hole.
Take out a speark plug, feed some rope into the spark plug hole to take up
the space inside the cylinder. Leave and end hanging out to enable you to
retrieve the rope, of course. The truly paranoid tie the end to something in
case it gets pulled into the cylinder whilst turning the engine over.
Bend back the locktab, and remove the puley.
---Original Message Folows---
Date: Tue, 16 Nov 2004 08:25:52 -0600
From: "Paul T. Root" <ptroot@iaces.com>
Subject: Re: pulley removal
Ok, I'm a little slow here. The first thing I thought was, "I'm
not putting rope down the spark plug hole!"
I'm guessing you mean put some rope down the edge of the pully so it
gets jammed in between the pully and the fan belt?
--
WOW! Homepage (http://www.wowway.com)
|