mgs
[Top] [All Lists]

RE: Factory Hard Top Fit

To: "MonteMorris" <mmorris@nemr.net>, "Vintage Norm"
Subject: RE: Factory Hard Top Fit
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Tue, 19 Oct 2004 12:40:23 -0700
Monte:

I think Norm just answered your question.  The rear quarter window areas
of the top will flex outward when the side brackets are tightened.  This
will lower the top and reduce the gap above the windows.

BTW.  I have a set of mounting brackets on order for myself from Moss
UK.  I'll take a look at the quality and check out pricing.  Hopefully
they will reasonable enough to make fabrication not worth while.

Norm:  I didn't know that the tops were serial numbered.  I'll have to
look for the numbers on mine, when I get a chance.  Unfortunately two of
them are in deep storage and would be tough to get to.



Kelvin.



-----Original Message-----
From: owner-mgs@Autox.Team.Net [mailto:owner-mgs@Autox.Team.Net] On
Behalf Of MonteMorris
Sent: Monday, October 18, 2004 8:00 PM
To: Vintage Norm; mgs@Autox.Team.Net
Subject: Re: Factory Hard Top Fit

Norm,
No, I haven't fitted any side brackets to the top yet. I set the top on
the
car to size the brackets for fabrication, but when it was so far from
fitting,
I decided not to "build" the brackets.  Kelvin suggested that the seals
might
just need to settle in, but I can't imagine them settling that much.
Thanks,
Monte

  ----- Original Message -----
  From: Vintage Norm
  To: mmorris@nemr.net ; mgs@autox.team.net
  Sent: Monday, October 18, 2004 9:45 PM
  Subject: Factory Hard Top Fit


  Monte:



  I bought a factory ht in 1994 when I had my 1980 B.  When I sold the
'80 B,
the top stayed for use on my 1966 B.  It is still on the '66. (See:
http://www.homestead.com/ctmgclub/files/event04/collier10.jpg)   And, it
fit
both very well.



  You say you didn't have the side brackets when you brought it home.
Have
you fitted them yet?  Those brackets will pull the top down a lot.  You
may
also want to look at some of the aftermarket rubber seal suppliers.  I
bought
some weatherstripping from Steele to fit the edge of the top where the
windows
touch.  It forms an excellent seal.  The only additional sealing I had
to do
on the '80 was at the lower rear part of the window where it didn't
quite seal
completely.  A small piece of adhesive-backed weatherstripping from the
hardware store solved the problem.



  So, bottom line - the factory top WILL fit both CB & RB cars.



  BTW, I'm assuming yours is a real factory top, not a look-a-like.



  That brings up an interesting question - does anyone know what
numbered tops
were made in which years?  The factory tops had serial numbers.  And,
like our
cars, they may have sequences that relate to certain years.



  Norm Sippel

  '66 MGB

  Finished 33rd of 67 "Faster" MG's in Collier Cup w/hardtop

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8





<Prev in Thread] Current Thread [Next in Thread>