RE: tie rod end still stuck on shaft

["Steve Shoyer" <Steve@shoyer.com>]

Jim:

Try more heat.  I tried a number of things on my car, but it was the
torch that finally worked.  I used one big wrench on the nut and one
smaller wrench with a 2' cheater bar on the tie rod end.

--Steve (1980 MGB)

-----Original Message-----
From: James Schulte [mailto:schultejim@msn.com] 
Subject: tie rod end still stuck on shaft

... The problem is getting the tie rod end off the shaft...

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8