This is very confusing. Originally you quoted the AUD numbers as being
incorrect, then you say that charts with the AUD number will probably be
correct and it is the 1/2/3 code information that is incorrect. You quote
AAE, ADB and 7 which are .90 needles, but my dimensions from Win SU match up
with the dimensions on your site for those three, so I'm still none the
wiser. So I do a search on Google for AUD1328 and British Automotive gives
the code for that as SM, which is a .100 needle, and another site gives SN
as the code for the AUD1329. I check these on my listings against your site
and find that they are indeed different, but SM is different at stations 5
to 14 and SN is different only at station 4. Phew! Thanks for advising of
the problem, Paul, but you don't make it easy ...
PaulH.
----- Original Message -----
> ... If you look at the charts
> that list them by part number (AUDxxx AUCxxx etc)
> chances are the list you're looking at is OK. If listed solely
> by their 1/2/3 letter designation (AAE, ADB, #7 etc)
> these two were scrambled for stations 4 through 13
> while someone was typing up the list.
>
> > So what *are* the correct dimensions then? And if they are wrong, how
many
> > of the others are?
> >
> > > Please take a look at your AUD1328 and AUD 1329
> > > needle info. Quite a few books have them wrong.
|