I think this question or some other linkage question came up a few years
ago so I took some pictures here that may be of help:
http://www.imt.net/~dcouncil/mg/su_linkage.html
David Councill
67 BGT
72 B
At 10:10 PM 4/14/2004 -0400, you wrote:
>I am having a problem figuring out how to reattach the choke cable to the HS4
>carbs on my '71 MGB. The end of the cable attaches to the air cleaner
>bracket on the front carb. So my problem is - how does the choke cable
>work if the
>end is attached to a non moving bracket. I know the sheath the cable sits in
>is supposed to move the linkage.
>As of right now, when I try pull the choke it does not move.
>
>Any help would be greatly appreciated.
>
>Thanks
>Tim
>1971 BRG MGB
|