Headlights aren't fused as standard, unless you meant a generic 'fused' as
in 'failed'. The light from a parking light bulb in a headlight wouldn't
help the driver of course, but it does give a slightly better indication of
vehicle width than the separate parking light on the wing due to it being in
a large reflective bowl, and safety may have been the reason for moving it
from the wing into the headlight. But not even North America required both.
So I would say it just comes down to *having* to have it in the headlight if
you have a rubber bumper, and not *having* to fit it if you have a chrome
bumper, particularly if it is going to require some engineering to fit.
PaulH.
----- Original Message -----
From: "Paul Root" <proot@iaces.com>
To: "Paul Hunt (T)" <paul.hunt1@blueyonder.co.uk>
Cc: "Barrie Robinson" <barrier@bconnex.net>; <mgb-v8@autox.team.net>;
<mgs@autox.team.net>
Sent: Monday, December 08, 2003 4:00 PM
Subject: Re: Headlight positioning
> I'm thinking the extra bulbs are the safty ones that are wired
> separately so if you blow a fuse on the 'real' headlights, you can
> have some limp it home lowerpower lights to run.
>
> At least I think that's what I got out to the thread of last month.
>
> Paul.
>
>
> Paul Hunt (T) wrote:
> > Yes - as you look at the front of the car. In the normal handing
parlance
> > (i.e. sitting in a seat and facing forward) they would both be at the
top
> > and the right-hand side.
> >
> > Not sure if I understand the second question. Having both types
(parking
> > lights separate and as part of the headlight), one on each car, the
integral
> > parking bulb is nowhere near the ring, being about mid-way round the
curve
> > between edge and headlight bulb. You certainly don't need 'the extra
power'
> > when the headlights are on, but if you don't fit them and you have a
rubber
> > bumper you would have no front parking lights. If you have a chrome
bumper
> > with the front parking lights on the wing then having extra ones in the
> > headlights just puts more load on the battery.
> >
> > PaulH.
> >
> > ----- Original Message -----
> > From: "Barrie Robinson" <barrier@bconnex.net>
> > To: <mgb-v8@autox.team.net>; <mgs@autox.team.net>
> > Sent: Monday, December 08, 2003 5:00 PM
> > Subject: Headlight positioning
> >
> >
> >
> >>someone said that the adjuster screws had to be at 12 and 9 o'clock on
> >
> > BOTH
> >
> >>sides. Is that correct?
> >>
> >>I also bought some Autopal 178mm Halogen head light units from LBCCo in
> >>Detroit and wonder if anyone has fitted them yet. They have a
secondary
> >>bulb which I wonder about (parking or driving?) and they will not fit
> >>inside the inner ring - So do I cut the inner ring to accommodate or is
> >
> > the
> >
> >>extra bulb power just not worth it??
> >
>
>
>
> --
> ______
> Paul T. Root <proot@iaces.com> / _ \
> 600 Stinson Blvd N.E., Fl 1S / /|| \\
> Minneapolis, MN 55413 ||\/ || _ |
> PAGER: +1 (877) 693-7155 || || ||
> WORK: +1 (612) 664-3385 \ ||__//
> \______/
|