Re: Gave up trying to remove calipers

[Bullwinkle <yd3@nvc.net>]

Bob:

<<<snip>>>
I used a good fitting socket, a long bar and a BMFH (mini sledge
hammer)then soaked
the area with PB Blaster and started swinging. 
<<<snip>>>
Use a six point instead of a twelve.  Also try an air impact tool.  Most
of the sockets designed for them are six point anyway.

Blake

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive