They have isolating rubber washers but they shouldn't move much.
MGALUVR@aol.com wrote:
> I just recently acquired a rebuilt set of SU's for my MGA roadster. I have
> noticed that there is a lot of movement of the float bowls. Aren't these
> supposed to be completely stationary once they are mounted? The rear float
> bowl has moved in towards the engine several times and actually come in
> contact with the tension springs on the throttle shaft. I have tried to move
> the bowls out away from the linkage and tighten them, but they seem to keep
> moving back towards the engine.....shouldn't these be rigidly mounted?
>
> TIA........Bill Dillstrom - Southwest Missouri
>
> 62 MKII MGA roadster - Old English White...with the "old" guy behind the
> wheel !
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|