Larry Colen SEZ -
> If the problem is that the gas pedal is too high, not too narrow, then
> there is a gas pedal adjustment bolt that is in the bulkhead. It's a
> 7/16" head bolt (1/4 nf) that goes into a nut welded to the bulkead on
> the flat area near the master cylinder.
This adjustment is also a life saver if your throttle cable breaks
(as mine did) out in the proverbial middle of nowhere. Just re-
connect the cable and adjust the pedal down until you have a
decent idle speed again.
--
David Breneman | "Just because something doesn't
Distributed Systems S/W Analyst | do what you planned it to do
Airborne Express, Inc. | doesn't mean it's useless."
david.breneman@airborne.com | - Thomas Edison
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|