Did you check for vacuum leaks?
--
-----------------------------------------------------------
Marc Siegel, Charm Net LLC eMail: smarc@abs.net
Baltimore, MD http://www.abs.net voice: 410/361-8160
> -----Original Message-----
> From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net]On
> Behalf Of MonteMorris
> Sent: Sunday, April 20, 2003 7:35 PM
> To: MG list
> Subject: high idle
>
>
> I've just gotten my newly rebuilt HS4's synchronized and tuned but I can't
> get the idle down below about 2500 RPM. The butterfly levers seem to be
> fully closed and I've backed off the idle adjustment screws until they
> aren't even touching anything. The same with the fast idle screws-they are
> not touching the cam.
> What am I missing?
> Thanks,
> Monte
> 79B, Carmine
> 67B, BRG
> 74 1/2 Rust, parts car
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|