mgs
[Top] [All Lists]

Re: Distributor clamp nut and bolt

To: "larryhoy" <larryhoy@marketvalue.net>, "MG list"
Subject: Re: Distributor clamp nut and bolt
From: Barney Gaylord <barneymg@MGAguru.com>
Date: Sat, 19 Apr 2003 14:46:59 -0500
At 12:57 PM 4/19/03 -0600, Larry Hoy wrote:
>Is the nut and bolt that squeezes the distributor clamp on an MGB
>Whitworth or metric?

Neither one.  It should be (was originally) 1/4-28 fine thread (UNF or SAE) 
with a 7/16" hex nut, and the bolt had a square head.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>