The plastic bit is only there to hold the wires in a certain position,
refabricateable from a lump of wood or plastic I would have thought. The
important bit is the metal band around the block which forms part of the
inductive pick-up.
----- Original Message -----
From: "Ross Bateman" <ross@rcsa.co.za>
To: "MG Mailing List" <mgs@autox.team.net>
Sent: Tuesday, April 15, 2003 6:23 AM
Subject: Rev Counter Loop
> The problem I have is the little plastic tab thingy that makes the loop at
> the rev counter. It is also quite badly melted and I don't think I will be
> able to salvage it to loop the new cable around.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|