so will they fit in stock B calipers? I'm pretty sure that at one point I
read that they did, but now I can't remember.
James Nazarian
71B Tourer
71BGT V8
85 Dodge Ram
----- Original Message -----
From: Telewest (PH) <paul.hunt1@blueyonder.co.uk>
To: james <jhn3@uakron.edu>; <mgs@autox.team.net>
Sent: Tuesday, March 18, 2003 4:28 AM
Subject: Re: EBC Brakepads
> Pads for the factory V8 are handed, that is, there is an inner pad and an
> outer pad in each pair, and they won't fit the other way round in a
factory
> caliper.
>
> ----- Original Message -----
> From: "james" <jhn3@uakron.edu>
> To: <mgs@autox.team.net>
> Sent: Monday, March 17, 2003 9:12 PM
> Subject: Re: EBC Brakepads
>
>
> > This brings up another question, I noticed that there are different
part
> > numbers for the 1800 and the V8 Bs. For standard pads, the V8 ones are
> > about 20% larger then the 1800 pads, is this the case for the EBC pads,
as
> > well, or are they intended for different calipers? Since these are for
my
> > V8, I'll take the larger ones.
> >
> > Thanks to Matt for sending along the part numbers for the 1800 and V8
> pads.
> >
> > James Nazarian
> > 71B Tourer
> > 71BGT V8
> > 85 Dodge Ram
> >
> > Tirerack.com can get them. You'll have to call in the order, though;
it's
> > not in the online database.
> > Part numbers are DP2107 or DP2240(v8 pads)
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|