Re: Front suspension rebuild options

["Bill Meyer" <wcameyer@msn.com>]

Why should it be necessary to torque the V8's at ride height?  Won't the
steel sleeve rotate on the bolt?

Bill


> is that the V8 style have to be pressed in, while the polys could be
> installed with a little hand pressure.  The polys are two pieces so one
half
> is pushed in from each side.  Both should be toruqued at ride height, but
> the polys won't twist so it shouldn't matter for them.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive