When I tried to put my headliner back in after recovering it (I did not
take it out) I did not see that the metal bit would come out. All seemed
to be built in for life!! There is obviously a knack to taking it out and
putting it back (as the actress said to the bishop) . The chap who did my
glass did mine and he said it was "no bother"
At 07:10 PM 2/20/2003 -0500, james wrote:
>The steel piece that you mention, where the sunvisors bolt, does not come
>out, it is part of the roof structure. The vinyl cover comes off of it
>usually in small brittle pieces, but is only available for sale with the
>entire headliner kit which is about $210 or $250 from the usual suspects.
>
>James Nazarian
>71 B tourer
>71 BGT V8
>85 Dodge Ram
>
>----- Original Message -----
>From: Larry Colen <lrcar@red4est.com>
>To: mgs <mgs@autox.team.net>
>Sent: 20 February, 2003 1:12 AM
>Subject: Headliner etc.
>
>
> > I need to get some welding done on my BGT's rollcage.
> >
> > There appears to be a piece about 1 inch by 2 that spans the top front
> > edge of the interior, right behind the windscreen. It is covered in
> > vinyl and seems to hold the headliner in place.
> >
> > Can this piece be removed? If so, how?
> >
> > Likewise can one remove the headliner? How much do replacement
> > headliners cost?
> >
> > I'd rather not go through the fun of removing and replacing the
> > windscreen.
> >
> > Larry
>
Regards
Barrie
Barrie Robinson
barrier@bconnex.net
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|