I don't know the number offhand, but there is a Fram filter (of the milky
white plastic variety) that has inlet and outlet at right angles, and large
capacity, that I am using for this purpose. I think the application may be a
Toyota -- what I did is take a sample of hose (for outlet size) and go down
to the store and look at the parts in blister-packs.
on 12/7/02 8:40 AM, cl4rk2@worldnet.att.net at cl4rk2@worldnet.att.net
wrote:
> My '69 MGB/GT originally did not come fitted w/ a fuel filter. I think
> a filter w/ a straight fitting and a right-angle type fitting would fit
> most naturally, connected between the braided fuel hose and a regular
> fuel hose to the T-connector. Can anyone suggest a brand and part
> number of a fuel filter that would fit into the braided fuel hose and
> has a right-angle fitting at the other end? What about volume
> capacity... some aftermarket filters are much smaller than others?
> Thanks in advance,
>
> -Kent
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|