All markets changed from the three-terminal flasher unit and turn switch
with three sets of contacts to the two-terminal unit and turn switch with
the single set of contacts during 1967. Schematics for both are on the web
site below, click on 'Spanners', 'Electrics', 'Schematics' and 'Turn
Signals' which should help in converting from the early system to the later
if that is what you want to do.
----- Original Message -----
From: "F. J. MacFarlane" <n5bgy@flash.net>
To: "MG List" <mgs@autox.team.net>
Sent: Friday, November 08, 2002 12:56 AM
Subject: Re: Turn Signal Switch Assembly Needed - '62 - '67 B
> As long as the main switch still makes contact, you can mod it so the dash
> indicators are connected to the turn signal lines, with the line that goes
> from the dash indicators to the flasher grounded. You'll need a US-style
> 2-terminal flasher, too, unless you get lucky and the original one flashes
> OK with the extra load (mine won't).
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|