Thanks for all the replies on my request. I also had several people
respond off list including Larry, Steve, and one other person. Its actually
my son doing the work and he said he finally got the axle free but was
having a problem getting the bearing free yesterday. Or so he was telling me.
I'll take on my 67BGT banjo axle one of these days. But I've got to finish
my 72B first. It was only a body shell last year - now its slowly heading
for completion, probably 80-85% complete right now.
David Councill
67 BGT
72 B
At 10:55 AM 11/1/2002 +0000, Telewest \(PH\) wrote:
>The first task is to remove the hub by cracking the taper. A puller should
>do this, but I just used a pair of metal wedges between the back of the hub
>and a couple of the back-plate bolts. Once that is off remove the four
>bolts securing the backplate and the bearing retainer. Then loosely refit
>the hub, and tapping at various points around the back of the hub should
>remove the half-shaft and bearing with the bearing cap and oil-seal.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|