You can get a sheet of heat shield material from Summit Racing
or similar. I got some this summer, it wasn't very expensive.
It's stick on, but it will sag, so you'll probably want to
pop rivet the corners.
Paul.
JAMES SCHULTE wrote:
> Listers and Engineers,
> I have an Alloy shield for my MGC that protects the
> carbs from exhaust manifold and header heat. It
> doesn't have any material on the exhaust side.
> Someone on the MG Enthusiast list said it will just
> conduct heat instead of shielding the heat. If this
> is the case, is there anything I could paint or attach
> in some way to the alloy to give it insulating power?
> Jim
> 69C
> 70B Heritage body shell
--
Paul T. Root E/Mail: proot@iaces.com
600 Stinson Blvd, Fl 1S PAG: +1 (877) 693-7155
Minneapolis, MN 55413 WRK: +1 (612) 664-3385
NIC: PTR FAX: +1 (612) 664-4779
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|