Check, that the bolts are sercured with correct rings - wavy type in order
to have the bolt secured. Best is to have a flat ring fit between the
securing ring and the shock.
Tighten well and this should work...
Cheers,
Hans
'71 BGT
----- Original Message -----
From: "Dan DiBiase" <d_dibiase@yahoo.com>
To: <mgs@autox.team.net>
Sent: Sunday, September 29, 2002 4:13 AM
Subject: Loose Shock....
> A month or so ago, I had a 'little' project on my '76 B to replace a shock
> link. I ended up removing one of the rear shocks to get the upper link
> bolt undone. The bolts holding the shock to the body loosened up, and I
> tightened 'em up today. Will this be a regular occurence?? Is there
> something I can do to make my nuts stay tight? (Careful now...).
>
> TIA....
>
>
>
> =====
> Dan
> The Garden State (What Exit?)
> '76 MGB Tourer (Driver)
> '65 MGB Tourer (Project)
> NAMGBR #5-2328
> http://mywebpages.comcast.net/dibiase/Working_MG_Gallery.html
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|